FAQ - SIM EN4165 Series 2 Connectors
Is the marking of a part ordered as a kit (part + accessories) identical to that of the part ordered alone?
Yes, the AALB marking rule requires parts (sold in kit or not) to be marked with the part number alone.
Is it possible to change the indexing of the coding nut?
Yes, it is possible.
Click here to download the procedure
Or see our catalog.
Is it possible to change the indexing of the coding key?
Yes, it is possible. But it is mandatory to replace the removed key by a new one.
How to read the coding?
Download here the procedure and read the "Instructions for nut and key polarizing" chapter
What is the difference between the nut and the key?
Nut polarizing are always mounted on receptacles.
Key polarizing are always mounted on plugs.
Does a scratch or a lack of protection affect the product performances?
Refer to our visual aid regarding plating.
Is it possible to extract a module that has been inserted in the connector cavity?
Yes, module are removable.
Click here to find insertion/extraction tools part numbers,
Or see our catalogue
Is it necessary to pre-bolt the cover-cover assembly before tightening it to torque?
Yes, it is recommended to pre-tighten all the screws before torquing in order to even out the force.
What is the tightening torque for the hood + cover assembly?
Tightening torque for cover and fastening screws: 0.5 to 0.7 N.m max.
See catalogue instructions.